-Homecare lifter provides paralysis patient or people with leg inquiry a safety transfer between floor, wheel chair, toilet and bed. It helps to reduce work strength of the nurses and improve the work efficiency.
-The steel construction is stable, the powder coated surface is easy to clean
-Two legs can adjust between 0-38 degrees, so to apply for all kinds of wheels and beds
- The rear wheels have locks, avoiding the patient move when lifting up the patient, which would possible to cause injury to nurse or patient
-The height between the post and the lifting pole can be adjusted, then the penitent can be lifted up to a suitable position.
- the patient has an emergency stop function
-The patient can turn 360 at an height during the lifting, to access a most comfort position
-The patient handle design accords to dynamics, easy to push forward, backward or turn

· Stamping ONE -TIME forming platform, welded by robot to ensure smooth surface no welding scar, bearing 250KG load. 
· Easy to be cleaned and installed
· Electric motor With UL/ROHS/EN Standard. Noise Under 50dB, With Lifetime of 20,000 Times Movement.
· Baosteel from Fortune Global 500
· Environmental plastic can be sterilized in 100°C, tensile up to 30MPa
· Process epoxy painting, ASTM testing anti-bacterial, paint thickness 0.12mm, brightness 60°, paint can resist 50kg impact
· Panasonic Robotic ensure 360° full smooth welding
· Castors with test report of BS EN 12530: 1998 standard, TPR tire no worn out after running 30KM, save anti-winding hard shell, united forming without bolts

· Actuator system
· Punching bag
· Dia 75mm(3") double wheel
· Remote Handle controller
· Pushing handle 
· Back-up battery 

· Gas spring system