· Electric height adjustment by Actuator system.
· Back section adjustment by Actuator system.
· The Structure is an epoxy coating.
· Mattress adopts one-time foam molding, easy to clean and sterilize.
· Back-section & Knee-section & Height adjustable by remote control(Foot pedal: optional).
· Stainless steel waste bin.
· Four swivel casters with locking casters in the rear.
· Leg Supports and Side Loops fitted as standard.
· Features a 3-section top design.
· ABS Cover base. Which is beautiful and easy to clean.
· Three functions: electric elevation & back-section adjustable & Leg-section adjustable.
· Equipped with ABS dirt tray & adjustable Leg support.
· Mobile silence wheels with brakes.

· Stamping ONE -TIME forming platform, welded by robot to ensure smooth surface no welding scar, bearing 250KG load. 
· Easy to be cleaned and installed.
· Electric motor With UL/ROHS/EN Standard. Noise Under 50dB, With Lifetime 20,000Times Movement.
· Baosteel from Fortune Global 500.
· Environmental plastic can be sterilized in 100°C, tensile up to 30MPa.
· Process epoxy painting, ASTM testing anti-bacterial, paint thickness 0.12mm, brightness 60°, paint can resist 50kg impact.
· Panasonic Robotic ensure 360° full smooth welding.
· Castors with test report of BS EN 12530: 1998 standard, TPR tire no worn out after running 30KM, save anti-winding hard shell, united forming without bolts.

· Electric actuator system
· Remote controller
· Silent wheel diameter 100mm
· Mattress thickness 5cm
· Footrest sliding
· Paper Roll Holder

· Mattress thickness 4cm, 6cm, 8cm
· Manual CPR system
· Stainless Steel IV Pole
· Foot pedal system
· Adjustable Arm-rest